Display Name: Find Routes

Description:

Category:

Help URL: https://www.mcatlas.org/arcgis5/rest/directories/arcgisoutput/tools/FindWalkRoutes_GPServer/tools_FindWalkRoutes/FindRoutes.htm

Execution Type: esriExecutionTypeAsynchronous

Parameters:

Parameter: Stops

Data Type: GPFeatureRecordSetLayer
Display Name Stops
Description: This tool routes between the stops specified in this parameter. A minimum of two stops are necessary to solve an analysis.When specifying the stops, you can set properties for each one, such as its name or service time, by using attributes. The stops can be specified with the following attributes:OBJECTID—The system-managed ID field.SHAPE—The geometry field indicating the geographic location of the incident.Name—The name of the stop. The name is used in the driving directions. If the name is not specified, a unique name prefixed with Location is automatically generated in the output stops, routes, and directions.RouteName—The name of the route to which the stop is assigned. Assigning the same route name to different stops causes those stops to be grouped together and visited by the same route. You can generate many routes in a single solve by assigning unique route names to different groups of stops. With this tool you can group up to 150 stops into one route.Sequence—The output routes will visit the stops in the order you specify with this attribute. Within a group of stops that have the same route name value, the sequence number should be greater than 0 but not greater than the total number of stops. Also, the sequence number should not be duplicated. If Reorder Stops To Find Optimal Routes is checked (True), all but possibly the first and last sequence values for each route name are ignored so the tool can find the sequence that minimizes overall travel for each route. (The settings for Preserve Ordering of Stops and Return to Start determine whether the first or last sequence values for each route are ignored.)AdditionalTime—The amount of time spent at the stop, which is added to the total time of the route. The units for this attribute value are specified by the Measurement Units parameter. The attribute value is included in the analysis only when the measurement units are time based. The default value is 0. Generally, the location of a stop, such as a home, isn't exactly on the street; it is set back somewhat from the road. This attribute value can be used to model the distance between the actual stop location and its location on the street, if it is important to include that distance in the total travel distance.AdditionalDistance—The extra distance traveled at the stops, which is added to the total distance of the route. The units for this attribute value are specified by the Measurement Units parameter. The attribute value is included in the analysis only when the measurement units are distance based. The default value is 0.Generally, the location of a stop, such as a home, isn't exactly on the street; it is set back somewhat from the road. This attribute value can be used to model the distance between the actual stop location and its location on the street, if it is important to include that distance in the total travel distance.TimeWindowStart—The earliest time the stop can be visited. Make sure you specify the value as a date and time value, such as 8/12/2015 12:15 PM. By specifying a start and end time for a stop's time window, you are defining when a route should visit the stop. As long as Use Time Windows is checked and you've chosen a time-based unit for Measurement Units, the tool will try to find a solution that minimizes overall travel and reaches the stop within the prescribed time window. When solving a problem that spans multiple time zones, time-window values refer to the time zone in which the stop is located.This field can contain a null value; a null value indicates a route can arrive at any time before the time indicated in the TimeWindowEnd attribute. If a null value is also present in TimeWindowEnd, a route can visit the stop at any time.TimeWindowEnd—The latest time the stop can be visited. Make sure you specify the value as a date and time value, such as 8/12/2015 12:15 PM. By specifying a start and end time for a stop's time window, you are defining when a route should visit the stop. As long as Use Time Windows is checked and you've chosen a time-based unit for Measurement Units, the tool will try to find a solution that minimizes overall travel and reaches the stop within the prescribed time window. When solving a problem that spans multiple time zones, time-window values refer to the time zone in which the stop is located.This field can contain a null value; a null value indicates a route can arrive at any time after the time indicated in the TimeWindowStart attribute. If a null value is also present in TimeWindowStart, a route can visit the stop at any time.CurbApproach—Specifies the direction a vehicle may arrive at and depart from the stop. The field value is specified as one of the following integers (use the numeric code, not the name in parentheses): 0 (Either side of vehicle)—The vehicle can approach and depart the stop in either direction, so a U-turn is allowed at the stop. This setting can be chosen if it is possible and practical for your vehicle to turn around at the stop. This decision may depend on the width of the road and the amount of traffic or whether the stop has a parking lot where vehicles can enter and turn around. 1 ( Right side of vehicle)—When the vehicle approaches and departs the stop, the stop must be on the right side of the vehicle. A U-turn is prohibited. This is typically used for vehicles such as buses that must arrive with the bus stop on the right-hand side. 2 (Left side of vehicle)—When the vehicle approaches and departs the stop, the curb must be on the left side of the vehicle. A U-turn is prohibited. This is typically used for vehicles such as buses that must arrive with the bus stop on the left-hand side. 3 (No U-Turn)—When the vehicle approaches the stop, the curb can be on either side of the vehicle; however, the vehicle must depart without turning around. The CurbApproach property is designed to work with both kinds of national driving standards: right-hand traffic (United States) and left-hand traffic (United Kingdom). First, consider a stop on the left side of a vehicle. It is always on the left side regardless of whether the vehicle travels on the left or right half of the road. What may change with national driving standards is your decision to approach a stop from one of two directions, that is, so it ends up on the right or left side of the vehicle. For example, if you want to arrive at a stop and not have a lane of traffic between the vehicle and the stop, you would choose Right side of vehicle (1) in the United States but Left side of vehicle (2) in the United Kingdom.
Direction: esriGPParameterDirectionInput
Default Value:
Geometry Type: esriGeometryPoint
HasZ: false
HasM: false
Spatial Reference: 4326  (4326)

Fields:
• OBJECTID ( type: esriFieldTypeOID , alias: OBJECTID )
• Name ( type: esriFieldTypeString , alias: Name , length: 128 )
• RouteName ( type: esriFieldTypeString , alias: Route Name , length: 128 )
• Sequence ( type: esriFieldTypeInteger , alias: Sequence )
• AdditionalTime ( type: esriFieldTypeDouble , alias: Additional Time )
• AdditionalDistance ( type: esriFieldTypeDouble , alias: Additional Distance )
• TimeWindowStart ( type: esriFieldTypeDate , alias: Time Window Start , length: 8 )
• TimeWindowEnd ( type: esriFieldTypeDate , alias: Time Window End , length: 8 )
• CurbApproach ( type: esriFieldTypeSmallInteger , alias: Curb Approach )
• LocationType ( type: esriFieldTypeInteger , alias: Location Type )
Features: None.



Parameter Type: esriGPParameterTypeRequired
Category:


Parameter: Measurement_Units

Data Type: GPString
Display Name Measurement Units
Description: Specify the units that should be used to measure and report the total travel time or travel distance for the output routes. The units you choose for this parameter determine whether the tool will measure distance or time to find the best routes. Choose a time unit to minimize travel time for your chosen travel mode (driving or walking time, for instance). To minimize travel distance for the given travel mode, choose a distance unit. Your choice also determines in which units the tool will report total time or distance in the results. The choices include the following:MetersKilometersFeetYardsMilesNauticalMilesSecondsMinutesHoursDaysThe tool chooses whether to use the network cost attribute specified in the Time Attribute or Distance Attribute parameter depending on whether the chosen measurement units are time or distance based. The tool performs the necessary unit conversion when the Measurement Units value differs from the units of the corresponding time or distance cost attribute.
Direction: esriGPParameterDirectionInput
Default Value: Minutes
Parameter Type: esriGPParameterTypeRequired
Category:
Choice List: [ Minutes, Seconds, Hours, Days, Miles, Kilometers, Meters, Feet, Yards, NauticalMiles ]

Parameter: Output_Routes_Name

Data Type: GPString
Display Name Output Routes Name
Description: The name of the output feature class containing routes or the lines that connect stops. This feature class also contains, as an attribute, the total travel time or distance.Output from Find Routes describes the schema of this output feature class.
Direction: esriGPParameterDirectionInput
Default Value: Routes
Parameter Type: esriGPParameterTypeRequired
Category:


Parameter: Output_Route_Edges_Name

Data Type: GPString
Display Name Output Route Edges Name
Description: The name of the output feature class containing the route edges. Route edges represent the individual street features that are traversed by a route.Output from Find Routes describes the schema of this output feature class.
Direction: esriGPParameterDirectionInput
Default Value: RouteEdges
Parameter Type: esriGPParameterTypeRequired
Category:


Parameter: Output_Directions_Name

Data Type: GPString
Display Name Output Directions Name
Description: The name of the output feature class containing directions. Output from Find Routes describes the schema of this output feature class.
Direction: esriGPParameterDirectionInput
Default Value: Directions
Parameter Type: esriGPParameterTypeRequired
Category:


Parameter: Output_Stops_Name

Data Type: GPString
Display Name Output Stops Name
Description: The name of the output feature class containing the output stops. Output from Find Routes describes the schema of this output feature class.
Direction: esriGPParameterDirectionInput
Default Value: Stops
Parameter Type: esriGPParameterTypeRequired
Category:


Parameter: Reorder_Stops_to_Find_Optimal_Routes

Data Type: GPBoolean
Display Name Reorder Stops to Find Optimal Routes
Description: Specify whether to visit the stops in the order you define or the order the tool determines will minimize overall travel. Checked (True):The tool determines the sequence that will minimize overall travel distance or time. It can reorder stops and account for time windows at stops. Additional parameters allow you to preserve the first or last stops while allowing the tool to reorder the intermediary stops.Unchecked (False):The stops are visited in the order you define. This is the default option. You can set the order of stops using a Sequence attribute in the input stops features or let the sequence be determined by the Object ID of the stops. Finding the optimal stop order and the best routes is commonly known as solving the traveling salesman problem (TSP).
Direction: esriGPParameterDirectionInput
Default Value: false
Parameter Type: esriGPParameterTypeOptional
Category:


Parameter: Preserve_Terminal_Stops

Data Type: GPString
Display Name Preserve Terminal Stops
Description: When Reorder Stops to Find Optimal Routes is checked (or True), you have options to preserve the starting or ending stops and the tool can reorder the rest. The first and last stops are determined by their Sequence attribute values or, if the Sequence values are null, by their Object ID values.PRESERVE_BOTH—Preserves the first and last stops by input order as the first and last stops in the route. PRESERVE_FIRST—Preserves the first stop by input order as the first stop in the route, but the last stop is free to be reordered. PRESERVE_LAST—Preserves the last stop by input order as the last stop in the route, but the first stop is free to be reordered. PRESERVE_NONE—Frees both the first and last stop to be reordered. Preserve Terminal Stops is ignored when Reorder Stops to Find Optimal Routes is unchecked (or False).
Direction: esriGPParameterDirectionInput
Default Value: PRESERVE_FIRST
Parameter Type: esriGPParameterTypeOptional
Category:
Choice List: [ PRESERVE_FIRST, PRESERVE_LAST, PRESERVE_BOTH, PRESERVE_NONE ]

Parameter: Return_to_Start

Data Type: GPBoolean
Display Name Return to Start
Description: Choose whether routes should start and end at the same location. With this option you can avoid duplicating the first stop feature and sequencing the duplicate stop at the end.The starting location of the route is the stop feature with the lowest value in the Sequence attribute. If the Sequence values are null, it is the stop feature with the lowest Object ID value.Checked (True) - The route should start and end at the first stop feature. This is the default value. Unchecked (False) - The route won't start and end at the first stop feature.
Direction: esriGPParameterDirectionInput
Default Value: false
Parameter Type: esriGPParameterTypeOptional
Category:


Parameter: Use_Time_Windows

Data Type: GPBoolean
Display Name Use Time Windows
Description: Check this option (or set it to True) if any input stops have time windows that specify when the route should reach the stop. You can add time windows to input stops by entering time values in the TimeWindowStart and TimeWindowEnd attributes.Checked (True):The input stops have time windows and you want the tool to try to honor them.Unchecked (False):The input stops don't have time windows, or if they do, you don't want the tool to try to honor them. This is the default value. The tool will take slightly longer to run when Use Time Windows is checked (or True), even when none of the input stops have time windows, so it is recommended to uncheck this option (set to False) if possible.
Direction: esriGPParameterDirectionInput
Default Value: false
Parameter Type: esriGPParameterTypeOptional
Category: Advanced Analysis


Parameter: Time_of_Day

Data Type: GPDate
Display Name Time of Day
Description: Specifies the time and date at which the routes should begin. If your network dataset contains live or historical traffic data, specifying a time-of-day results in a more accurate estimation of travel time between stops because the travel times account for the traffic conditions that are applicable for that date and time.The Time Zone for Time of Day parameter specifies whether this time and date refer to UTC or the time zone in which the stop is located.The tool ignores this parameter when Measurement Units isn't set to a time-based unit.
Direction: esriGPParameterDirectionInput
Default Value:
Parameter Type: esriGPParameterTypeOptional
Category: Advanced Analysis


Parameter: Time_Zone_for_Time_of_Day

Data Type: GPString
Display Name Time Zone for Time of Day
Description: Specifies the time zone of the Time of Day parameter.GEO_LOCAL—The Time of Day parameter refers to the time zone in which the first stop of a route is located. If you are generating many routes that start in multiple times zones, the start times are staggered in Coordinated Universal Time (UTC). For example, a Time of Day value of 10:00 a.m., 2 January, would mean a start time of 10:00 a.m. Eastern Standard Time (3:00 p.m. UTC) for routes beginning in the Eastern Time Zone and 10:00 a.m. Central Standard Time (4:00 p.m. UTC) for routes beginning in the Central Time Zone. The start times are offset by one hour in UTC.The arrive and depart times and dates recorded in the output Stops feature class will refer to the local time zone of the first stop for each route.UTC—The Time of Day parameter refers to Coordinated Universal Time (UTC). Choose this option if you want to generate a route for a specific time, such as now, but aren't certain in which time zone the first stop will be located.If you are generating many routes spanning multiple times zones, the start times in UTC are simultaneous. For example, a Time of Day value of 10:00 a.m., 2 January, would mean a start time of 5:00 a.m. Eastern Standard Time(UTC-5:00) for routes beginning in the Eastern Time Zone and 4:00 a.m. Central Standard Time (UTC-6:00) for routes beginning in the Central Time Zone. Both routes would start at 10:00 a.m. UTC.The arrive and depart times and dates recorded in the output Stops feature class will refer to UTC.
Direction: esriGPParameterDirectionInput
Default Value: GEO_LOCAL
Parameter Type: esriGPParameterTypeOptional
Category: Advanced Analysis
Choice List: [ UTC, GEO_LOCAL ]

Parameter: UTurn_Policy

Data Type: GPString
Display Name UTurn Policy
Description: The U-Turn policy at junctions. Allowing U-turns implies the solver can turn around at a junction and double back on the same street. Given that junctions represent street intersections and dead ends, different vehicles may be able to turn around at some junctions but not at others—it depends on whether the junction represents an intersection or dead end. To accommodate, the U-turn policy parameter is implicitly specified by how many edges, or streets, connect to the junction, which is known as junction valency. The acceptable values for this parameter are listed below; each is followed by a description of its meaning in terms of junction valency. ALLOW_UTURNS—U-turns are permitted at junctions with any number of connected edges, or streets. This is the default value. NO_UTURNS—U-turns are prohibited at all junctions, regardless of junction valency.ALLOW_DEAD_ENDS_ONLY—U-turns are prohibited at all junctions, except those that have only one adjacent edge (a dead end).ALLOW_DEAD_ENDS_AND_INTERSECTIONS_ONLY—U-turns are prohibited at junctions where exactly two adjacent edges meet but are permitted at intersections (junctions with three or more adjacent edges) and dead ends (junctions with exactly one adjacent edge). Oftentimes, networks modeling streets have extraneous junctions in the middle of road segments. This option prevents vehicles from making U-turns at these locations.The value of this parameter is overridden when Travel Mode (Travel_Mode in Python) is set to any value other than custom.
Direction: esriGPParameterDirectionInput
Default Value: ALLOW_UTURNS
Parameter Type: esriGPParameterTypeOptional
Category: Custom Travel Mode
Choice List: [ ALLOW_UTURNS, NO_UTURNS, ALLOW_DEAD_ENDS_ONLY, ALLOW_DEAD_ENDS_AND_INTERSECTIONS_ONLY ]

Parameter: Point_Barriers

Data Type: GPFeatureRecordSetLayer
Display Name Point Barriers
Description: Specifies point barriers, which are split into two types: restriction and added cost point barriers. They temporarily restrict traversal across or add impedance to points on the network. The point barriers are defined by a feature set, and the attribute values you specify for the point features determine whether they are restriction or added cost barriers. The fields in the attribute table are listed and described below. ObjectID: The system-managed ID field. Shape: The geometry field indicating the geographic location of the network analysis object.Name: The name of the barrier.BarrierType: Specifies whether the barrier restricts travel completely or adds cost when traveling through it. There are two options: Restriction (0)—Prohibits traversing through the barrier. This is the default value. Added Cost (2)—Traversing through the barrier increases the network cost by the amount specified in the Additional_Time and Additional_Distance fields. Use the value 0 for Restriction and 2 for Added Cost.Additional_Time:Indicates how much travel time is added when the barrier is traversed. This field is applicable only for added-cost barriers and only if the measurement units are time based. This field value must be greater than or equal to zero, and its units are the same as those specified in the Measurement Units parameter.Additional_Distance:Indicates how much distance is added when the barrier is traversed. This field is applicable only for added-cost barriers and only if the measurement units are distance based. The field value must be greater than or equal to zero, and its units are the same as those specified in the Measurement Units parameter.
Direction: esriGPParameterDirectionInput
Default Value:
Geometry Type: esriGeometryPoint
HasZ: false
HasM: false
Spatial Reference: 4326  (4326)

Fields:
• OBJECTID ( type: esriFieldTypeOID , alias: OBJECTID )
• Name ( type: esriFieldTypeString , alias: Name , length: 128 )
• BarrierType ( type: esriFieldTypeInteger , alias: Barrier Type )
• Additional_Time ( type: esriFieldTypeDouble , alias: Additional Time )
• Additional_Distance ( type: esriFieldTypeDouble , alias: Additional Distance )
• CurbApproach ( type: esriFieldTypeSmallInteger , alias: CurbApproach )
Features: None.



Parameter Type: esriGPParameterTypeOptional
Category: Barriers


Parameter: Line_Barriers

Data Type: GPFeatureRecordSetLayer
Display Name Line Barriers
Description: Specifies line barriers, which temporarily restrict traversal across them. The line barriers are defined by a feature set. The fields in the attribute table are listed and described below. ObjectID: The system-managed ID field.Shape: The geometry field indicating the geographic location of the network analysis object. Name: The name of the barrier.
Direction: esriGPParameterDirectionInput
Default Value:
Geometry Type: esriGeometryPolyline
HasZ: false
HasM: false
Spatial Reference: 4326  (4326)

Fields:
• OBJECTID ( type: esriFieldTypeOID , alias: OBJECTID )
• Name ( type: esriFieldTypeString , alias: Name , length: 128 )
• BarrierType ( type: esriFieldTypeInteger , alias: BarrierType )
• SHAPE_Length ( type: esriFieldTypeDouble , alias: SHAPE_Length )
Features: None.



Parameter Type: esriGPParameterTypeOptional
Category: Barriers


Parameter: Polygon_Barriers

Data Type: GPFeatureRecordSetLayer
Display Name Polygon Barriers
Description: Specifies polygon barriers, which are split into two types: restriction and scaled cost polygon barriers. They temporarily restrict traversal or scale impedance on the parts of the network they cover. The polygon barriers are defined by a feature set, and the attribute values you specify for the polygon features determine whether they are restriction or scaled cost barriers. The fields in the attribute table are listed and described below. ObjectID: The system-managed ID field. Shape: The geometry field indicating the geographic location of the network analysis object. Name: The name of the barrier. BarrierType: Specifies whether the barrier restricts travel completely or scales the cost of traveling through it. There are two options:Restriction (0)—Prohibits traversing through any part of the barrier. This is the default value.Scaled Cost (1)—Scales the impedance of underlying edges by multiplying them by the value of the ScaledCostFactor property. If edges are partially covered by the barrier, the impedance is apportioned and multiplied.Use the value 0 for Restriction and 1 for Scaled Cost.ScaledTimeFactor:This is the factor by which the travel time of the streets intersected by the barrier is multiplied. This field is applicable only for scaled-cost barriers and only if the measurement units are time based. The field value must be greater than zero.ScaledDistanceFactor:This is the factor by which the distance of the streets intersected by the barrier is multiplied. This attribute is applicable only for scaled-cost barriers and only if the measurement units are distance based. The attribute value must be greater than zero.
Direction: esriGPParameterDirectionInput
Default Value:
Geometry Type: esriGeometryPolygon
HasZ: false
HasM: false
Spatial Reference: 4326  (4326)

Fields:
• OBJECTID ( type: esriFieldTypeOID , alias: OBJECTID )
• Name ( type: esriFieldTypeString , alias: Name , length: 128 )
• BarrierType ( type: esriFieldTypeSmallInteger , alias: Barrier Type )
• ScaledTimeFactor ( type: esriFieldTypeDouble , alias: Scaled Time Factor )
• ScaledDistanceFactor ( type: esriFieldTypeDouble , alias: Scaled Distance Factor )
• SHAPE_Length ( type: esriFieldTypeDouble , alias: SHAPE_Length )
• SHAPE_Area ( type: esriFieldTypeDouble , alias: SHAPE_Area )
Features: None.



Parameter Type: esriGPParameterTypeOptional
Category: Barriers


Parameter: Time_Attribute

Data Type: GPString
Display Name Time Attribute
Description: Defines the network cost attribute to use when the measurement units value is a time unit. The tool performs the necessary time-unit conversion when the measurement units value differs from the units of the cost attribute defined here. In other words, the time units of the default cutoff and the network cost attribute don't need to be the same.The value of this parameter is overridden when Travel Mode (Travel_Mode in Python) is set to any value other than Custom.
Direction: esriGPParameterDirectionInput
Default Value: Minutes
Parameter Type: esriGPParameterTypeOptional
Category: Custom Travel Mode
Choice List: [ Minutes ]

Parameter: Time_Attribute_Units

Data Type: GPString
Display Name Time Attribute Units
Description: The units of the network cost attribute specified by the Time Attribute parameter. This is merely an informational parameter that cannot be changed without directly editing the network dataset. It is also unnecessary to change since the unit conversions between measurement units and the cost attribute are handled for you.The value of this parameter is overridden when Travel Mode is set to any value other than Custom.
Direction: esriGPParameterDirectionInput
Default Value: Minutes
Parameter Type: esriGPParameterTypeOptional
Category: Custom Travel Mode


Parameter: Distance_Attribute

Data Type: GPString
Display Name Distance Attribute
Description: Defines the network cost attribute to use when the measurement units value is a distance unit.The tool performs the necessary distance-unit conversion when the measurement units value differs from the units of the cost attribute defined here. In other words, the measurement units and the distance units of the network cost attribute don't need to be the same.The value of this parameter is overridden when Travel Mode (Travel_Mode in Python) is set to any value other than Custom.
Direction: esriGPParameterDirectionInput
Default Value: Length
Parameter Type: esriGPParameterTypeOptional
Category: Custom Travel Mode
Choice List: [ Length ]

Parameter: Distance_Attribute_Units

Data Type: GPString
Display Name Distance Attribute Units
Description: The units of the network cost attribute specified by the Distance Attribute parameter. This is merely an informational parameter that cannot be changed without directly editing the network dataset. It is also unnecessary to change since the unit conversions between measurement units and the cost attribute are handled for you.The value of this parameter is overridden when Travel Mode is set to any value other than Custom.
Direction: esriGPParameterDirectionInput
Default Value: Miles
Parameter Type: esriGPParameterTypeOptional
Category: Custom Travel Mode


Parameter: Use_Hierarchy_in_Analysis

Data Type: GPBoolean
Display Name Use Hierarchy in Analysis
Description: Specify whether hierarchy should be used when finding the shortest routes between points.Checked (True) - Use hierarchy when finding routes. When hierarchy is used, the tool prefers higher-order streets (such as freeways) to lower-order streets (such as local roads) and can be used to simulate the driver preference of traveling on freeways instead of local roads even if that means a longer trip. This is especially true when finding routes to faraway facilities, because drivers on long-distance trips tend to prefer traveling on freeways where stops, intersections, and turns can be avoided. Using hierarchy is computationally faster, especially for long-distance routes, because the tool has to select the best route from a relatively smaller subset of streets. This is the default value.Unchecked (False) - Do not use hierarchy when finding routes. If hierarchy is not used, the tool considers all the streets and doesn't prefer higher-order streets when finding the route. This is often used when finding short-distance routes within a city.The parameter is disabled if a hierarchy attribute is not defined on the network dataset used to perform the analysis.You can use the Force Hierarchy Beyond Distance parameter to force the solver to use hierarchy even if Use Hierarchy in Analysis is set to false.This parameter is ignored unless Travel Mode is set to Custom. When modeling a custom walking mode, it is recommended to turn off hierarchy since the hierarchy is designed for motorized vehicles.
Direction: esriGPParameterDirectionInput
Default Value: false
Parameter Type: esriGPParameterTypeOptional
Category: Custom Travel Mode


Parameter: Restrictions

Data Type: GPMultiValue:GPString
Display Name Restrictions
Description: Indicates which network restriction attributes are respected during solve time. The value of this parameter is overridden when Travel Mode (Travel_Mode in Python) is set to any value other than custom.
Direction: esriGPParameterDirectionInput
Default Value:
Parameter Type: esriGPParameterTypeOptional
Category: Custom Travel Mode


Parameter: Attribute_Parameter_Values

Data Type: GPRecordSet
Display Name Attribute Parameter Values
Description: Specifies the parameter values for network attributes that have parameters. The record set has two columns that work together to uniquely identify parameters and another column that specifies the parameter value.The value of this parameter is overridden when Travel Mode (Travel_Mode in Python) is set to any value other than custom.The attribute parameter values record set has associated attributes. The fields in the attribute table are listed below and described. ObjectID: The system-managed ID field.AttributeName:The name of the network attribute whose attribute parameter is set by the table row.ParameterName:The name of the attribute parameter whose value is set by the table row. (Object type parameters cannot be updated using this tool.) ParameterValue:The value you want for the attribute parameter. If a value is not specified, the attribute parameter is set to null.
Direction: esriGPParameterDirectionInput
Default Value:
Fields:
• OBJECTID ( type: esriFieldTypeOID , alias: ObjectID )
• AttributeName ( type: esriFieldTypeString , alias: AttributeName , length: 255 )
• ParameterName ( type: esriFieldTypeString , alias: ParameterName , length: 255 )
• ParameterValue ( type: esriFieldTypeString , alias: ParameterValue , length: 25 )
Features: None.



Parameter Type: esriGPParameterTypeOptional
Category: Custom Travel Mode


Parameter: Accumulate_Attributes

Data Type: GPMultiValue:GPString
Display Name Accumulate Attributes
Description: List of cost attributes to be accumulated during analysis. These accumulation attributes are purely for reference; the solver only uses the cost attribute specified by the Time Attribute (Time_Attribute in Python) or Distance Attribute (Distance_Attribute in Python) parameter to calculate the shortest paths. For each cost attribute that is accumulated, a Total_[attribute] field is added to the routes that are output by the solver.
Direction: esriGPParameterDirectionInput
Default Value:
Parameter Type: esriGPParameterTypeOptional
Category: Network Dataset


Parameter: Maximum_Snap_Tolerance

Data Type: GPLinearUnit
Display Name Maximum Snap Tolerance
Description: The maximum snap tolerance is the furthest distance that Network Analyst searches when locating or relocating a point onto the network. The search looks for suitable edges or junctions and snaps the point to the nearest one. If a suitable location isn't found within the maximum snap tolerance, the object is marked as unlocated.
Direction: esriGPParameterDirectionInput
Default Value: 20.0   (esriKilometers)
Parameter Type: esriGPParameterTypeOptional
Category: Network Locations


Parameter: Feature_Locator_WHERE_Clause

Data Type: GPString
Display Name Feature Locator WHERE Clause
Description: A SQL expression used to select a subset of source features that limits on which network elements stops can be located. The syntax for this parameter consists of two parts: the first is the source feature class name (followed by a space) and the second is the SQL expression. To write a SQL expression for two or more source feature classes, separate them with a semicolon. To ensure facilities are not located on limited-access highways, for example, write a SQL expression like the following to exclude those source features: "Streets" "FUNC_CLASS not in('1', '2')". Note that barriers ignore the feature locator WHERE clause when loading.
Direction: esriGPParameterDirectionInput
Default Value: "WalkNetwork_Junctions" #;"WalkLinks" #
Parameter Type: esriGPParameterTypeOptional
Category: Network Locations


Parameter: Route_Shape

Data Type: GPString
Display Name Route Shape
Description: Specify the type of route features that are output by the tool. The parameter can be specified using one of the following values:TRUE_LINES_WITHOUT_MEASURES— Return the exact shape of the resulting route based on the underlying streets.TRUE_LINES_WITH_MEASURES— Return the exact shape of the resulting route based on the underlying streets. Additionally, construct measures so the shape may be used in linear referencing.STRAIGHT_LINES— Return a straight line between the stops.NO_LINES— Do not return any shapes for the routes. This value can be useful in cases where you are only interested in determining the total travel time or travel distance between the stops. When the Route Shape parameter is set to True Shape, the generalization of the route shape can be further controlled using the appropriate value for the Route Line Simplification Tolerance parameter. No matter which value you choose for the Route Shape parameter, the best route is always determined by minimizing the travel time or the travel distance, never using the straight-line distance between stops. This means that only the route shapes are different, not the underlying streets that are searched when finding the route.
Direction: esriGPParameterDirectionInput
Default Value: TRUE_LINES_WITHOUT_MEASURES
Parameter Type: esriGPParameterTypeOptional
Category: Output
Choice List: [ TRUE_LINES_WITHOUT_MEASURES, TRUE_LINES_WITH_MEASURES, STRAIGHT_LINES, NO_LINES ]

Parameter: Route_Line_Simplification_Tolerance

Data Type: GPLinearUnit
Display Name Route Line Simplification Tolerance
Description: Specify by how much you want to simplify the route geometry.The tool ignores this parameter if the Route Shape parameter isn't set to True lines with measures or True lines without measures. Simplification maintains critical points on a route, such as turns at intersections, to define the essential shape of the route and removes other points. The simplification distance you specify is the maximum allowable offset that the simplified line can deviate from the original line. Simplifying a line reduces the number of vertices that are part of the route geometry. This improves the tool execution time.The value of this parameter is overridden when Travel Mode (Travel_Mode in Python) is set to any value other than custom.
Direction: esriGPParameterDirectionInput
Default Value: 10.0   (esriMeters)
Parameter Type: esriGPParameterTypeOptional
Category: Custom Travel Mode


Parameter: Populate_Route_Edges

Data Type: GPBoolean
Display Name Populate Route Edges
Description: Specify whether the tool should generate edges for each route. Route edges represent the individual street features or other similar features that are traversed by a route. The output Route Edges layer is commonly used to see which streets or paths are traveled on the most or least by the resultant routes. Checked (True):Generate route edges. The output Route Edges layer is populated with line features. Unchecked (False):Don't generate route edges. The output Route Edges layer is returned, but it is empty.
Direction: esriGPParameterDirectionInput
Default Value: true
Parameter Type: esriGPParameterTypeOptional
Category: Output


Parameter: Populate_Directions

Data Type: GPBoolean
Display Name Populate Directions
Description: Specify whether the tool should generate driving directions for each route. Checked (True): Indicates that the directions will be generated and configured based on the values for the Directions Language, Directions Style Name, and Directions Distance Units parameters. Unchecked (False):Directions are not generated, and the tool returns an empty Directions layer.
Direction: esriGPParameterDirectionInput
Default Value: true
Parameter Type: esriGPParameterTypeOptional
Category: Output


Parameter: Directions_Language

Data Type: GPString
Display Name Directions Language
Description: Specify the language that should be used when generating driving directions. This parameter is used only when the Populate Directions parameter is checked, or set to True. The directions languages that are available depend on what ArcGIS language packs you have installed on your computer. The values are entered in two- or five-character language codes, for example, en for English or zh-CN for simplified Chinese. If an unsupported language code is specified, the tool returns the directions using the default language, English.
Direction: esriGPParameterDirectionInput
Default Value: en
Parameter Type: esriGPParameterTypeOptional
Category: Output
Choice List: [ en ]

Parameter: Directions_Distance_Units

Data Type: GPString
Display Name Directions Distance Units
Description: Specify the units for displaying travel distance in the driving directions. This parameter is used only when the Populate Directions parameter is checked, or set to True.MilesKilometersMetersFeetYardsNauticalMiles
Direction: esriGPParameterDirectionInput
Default Value: Miles
Parameter Type: esriGPParameterTypeOptional
Category: Output
Choice List: [ Miles, Kilometers, Meters, Feet, Yards, NauticalMiles ]

Parameter: Directions_Style_Name

Data Type: GPString
Display Name Directions Style Name
Description: Specify the name of the formatting style for the directions. This parameter is used only when the Populate Directions parameter is checked, or set to True. The parameter can be specified using the following values:NA Desktop— Generates turn-by-turn directions suitable for printing.NA Navigation— Generates turn-by-turn directions designed for an in-vehicle navigation device.NA Campus—Generates directions appropriate for pedestrian networks, including sidewalks and building interiors.
Direction: esriGPParameterDirectionInput
Default Value: NA Desktop
Parameter Type: esriGPParameterTypeOptional
Category: Output
Choice List: [ NA Desktop, NA Navigation, NA Campus ]

Parameter: Maximum_Features_Affected_by_Point_Barriers

Data Type: GPLong
Display Name Maximum Features Affected by Point Barriers
Description: Limits how many features can be affected by point barriers. This parameter helps you govern the amount of processing that occurs when solving. For example, you could assign a low value to this parameter for a free version of the service you are creating and use a higher value for a paid-subscription version of the service.A null value indicates there is no limit.
Direction: esriGPParameterDirectionInput
Default Value:
Parameter Type: esriGPParameterTypeOptional
Category: Service Capabilities


Parameter: Maximum_Features_Affected_by_Line_Barriers

Data Type: GPLong
Display Name Maximum Features Affected by Line Barriers
Description: Limits how many features can be affected by line barriers. This parameter helps you govern the amount of processing that occurs when solving. For example, you could assign a low value to this parameter for a free version of the service you are creating and use a higher value for a paid-subscription version of the service.A null value indicates there is no limit.
Direction: esriGPParameterDirectionInput
Default Value:
Parameter Type: esriGPParameterTypeOptional
Category: Service Capabilities


Parameter: Maximum_Features_Affected_by_Polygon_Barriers

Data Type: GPLong
Display Name Maximum Features Affected by Polygon Barriers
Description: Limits how many features can be affected by polygon barriers. This parameter helps you govern the amount of processing that occurs when solving. For example, you could assign a low value to this parameter for a free version of the service you are creating and use a higher value for a paid-subscription version of the service.A null value indicates there is no limit.
Direction: esriGPParameterDirectionInput
Default Value:
Parameter Type: esriGPParameterTypeOptional
Category: Service Capabilities


Parameter: Maximum_Stops

Data Type: GPLong
Display Name Maximum Stops
Description: Limits how many stops can be added to the route analysis. This parameter is related to the Stops parameter.This parameter helps you govern the amount of processing that occurs when solving. For example, you could assign a low value to this parameter for a free version of the service you are creating and use a higher value for a paid-subscription version of the service.A null value indicates there is no limit.
Direction: esriGPParameterDirectionInput
Default Value:
Parameter Type: esriGPParameterTypeOptional
Category: Service Capabilities


Parameter: Maximum_Stops_per_Route

Data Type: GPLong
Display Name Maximum Stops per Route
Description: Limits the maximum number of stops that can be assigned to each route in an analysis.Stops are preassigned to routes using the RouteName field of points in the Stops parameter.This parameter helps you govern the amount of processing that occurs when solving. For example, you could assign a low value to this parameter for a free version of the service you are creating and use a higher value for a paid-subscription version of the service.A null value indicates there is no limit.
Direction: esriGPParameterDirectionInput
Default Value:
Parameter Type: esriGPParameterTypeOptional
Category: Service Capabilities


Parameter: Force_Hierarchy_Beyond_Distance

Data Type: GPDouble
Display Name Force Hierarchy Beyond Distance
Description: Specifies the distance after which the solver will force hierarchy when finding routes, even if hierarchy is not enabled. The units of this parameter are the same as those shown in the Distance Attribute Units parameter.Finding routes between stops that are far away while using the network's hierarchy tends to incur much less processing than finding the same routes without using the hierarchy. This parameter helps you govern the amount of processing that occurs when solving.A null value indicates that the hierarchy will never be enforced and the value of the Use Hierarchy in Analysis parameter will always be honored. If the input network dataset does not support hierarchy, specifying a value for this parameter will result in an error. A null value should be used in this case. This parameter is disabled unless the network dataset includes a hierarchy attribute.
Direction: esriGPParameterDirectionInput
Default Value:
Parameter Type: esriGPParameterTypeOptional
Category: Service Capabilities


Parameter: Save_Output_Network_Analysis_Layer

Data Type: GPBoolean
Display Name Save Output Network Analysis Layer
Description: Choose whether the output includes a network analysis layer of the results. In either case, feature classes containing the results are returned. However, a server administrator may want to choose to output a network analysis layer as well so that the setup and results of the tool can be debugged using the Network Analyst controls in the ArcGIS Desktop environment. This can make the debugging process much easier. In ArcGIS Desktop, the default output location for the network analysis layer is in the scratch folder. You can determine the location of the scratch folder by evaluating the value of arcpy.env.scratchFolder geoprocessing environment in the Python window. The output network analysis layer is stored as an LYR file whose name begins with _ags_gpna and is followed by an alphanumeric GUID.
Direction: esriGPParameterDirectionInput
Default Value: false
Parameter Type: esriGPParameterTypeOptional
Category: Output


Parameter: Travel_Mode

Data Type: GPString
Display Name Travel Mode
Description: Choose the mode of transportation for the analysis. Custom is always a choice. For other travel mode names to appear, they must be present in the network dataset specified in the Network Dataset parameter. A travel mode is defined on a network dataset and provides override values for parameters that, together, model cars, trucks, pedestrians, or other modes of travel. By choosing a travel mode here, you don't need to provide values for the following parameters, which are overridden by values specified in the network dataset:UTurn PolicyTime AttributeTime Attribute UnitsDistance AttributeDistance Attribute UnitsUse Hierarchy in AnalysisRestrictionsAttribute Parameter ValuesRoute Line Simplification Tolerance CUSTOM—Define a travel mode that fits your specific needs. When Custom is chosen, the tool does not override the travel mode parameters listed above. This is the default value.
Direction: esriGPParameterDirectionInput
Default Value: CUSTOM
Parameter Type: esriGPParameterTypeOptional
Category:


Parameter: Solve_Succeeded

Data Type: GPBoolean
Display Name Solve Succeeded
Description:
Direction: esriGPParameterDirectionOutput
Default Value:
Parameter Type: esriGPParameterTypeDerived
Category:


Parameter: Output_Routes

Data Type: GPFeatureRecordSetLayer
Display Name Output Routes
Description:
Direction: esriGPParameterDirectionOutput
Default Value:
Geometry Type:
HasZ: false
HasM: false
Spatial Reference: N/A
Fields: None

Features: None.



Parameter Type: esriGPParameterTypeDerived
Category:


Parameter: Output_Route_Edges

Data Type: GPFeatureRecordSetLayer
Display Name Output Route Edges
Description:
Direction: esriGPParameterDirectionOutput
Default Value:
Geometry Type:
HasZ: false
HasM: false
Spatial Reference: N/A
Fields: None

Features: None.



Parameter Type: esriGPParameterTypeDerived
Category:


Parameter: Output_Directions

Data Type: GPFeatureRecordSetLayer
Display Name Output Directions
Description:
Direction: esriGPParameterDirectionOutput
Default Value:
Geometry Type:
HasZ: false
HasM: false
Spatial Reference: N/A
Fields: None

Features: None.



Parameter Type: esriGPParameterTypeDerived
Category:


Parameter: Output_Stops

Data Type: GPFeatureRecordSetLayer
Display Name Output Stops
Description:
Direction: esriGPParameterDirectionOutput
Default Value:
Geometry Type:
HasZ: false
HasM: false
Spatial Reference: N/A
Fields: None

Features: None.



Parameter Type: esriGPParameterTypeDerived
Category:


Parameter: Time_Zone_for_Time_Windows

Data Type: GPString
Display Name Time Zone for Time Windows
Description: Specifies the time zone for the time window values on stops. The time windows are specified as part of TimeWindowStart and TimeWindowEnd fields on stops. This parameter is applicable only when the Use Time Windows parameter is checked (or set to True). GEO_LOCAL— The time window values associated with the stops are in the time zone in which the stops are located. For example, if the stop is located in an area that follows Eastern Standard Time and has time window values of 8 a.m. and 10 a.m., the time window values will be treated as 8 a.m. and 10 a.m. in Eastern Standard Time.UTC— The time window values associated with the stops are in the Coordinated Universal Time (UTC). For example, if the stop is located in an area that follows Eastern Standard Time and has time window values of 8 a.m. and 10 a.m., the time window values will be treated as 12 p.m. and 2 p.m. Eastern Standard Time, assuming the Eastern Standard Time is obeying the Daylight Saving Time. Specifying the time window values in UTC is useful if you do not know the time zone in which the stops are located or when you have stops in multiple time zones and you want all the time windows to start simultaneously. The UTC option is applicable only when your network dataset defines a time zone attribute. If your network dataset does not define a time zone attribute, then all time window values are always treated as GEO_LOCAL.
Direction: esriGPParameterDirectionInput
Default Value: GEO_LOCAL
Parameter Type: esriGPParameterTypeOptional
Category: Advanced Analysis
Choice List: [ GEO_LOCAL, UTC ]

Parameter: Overrides

Data Type: GPString
Display Name Overrides
Description: Specify additional settings that can influence the behavior of the solver when finding solutions for the network analysis problems. The value for this parameter needs to be specified in JavaScript Object Notation (JSON). For example, a valid value is of the following form {"overrideSetting1" : "value1", "overrideSetting2" : "value2"}. The override setting name is always enclosed in double quotation marks. The values can be a number, Boolean, or a string. The default value for this parameter is no value, which indicates not to override any solver settings. Overrides are advanced settings that should be used only after careful analysis of the results obtained before and after applying the settings. A list of supported override settings for each solver and their acceptable values can be obtained by contacting Esri Technical Support.
Direction: esriGPParameterDirectionInput
Default Value:
Parameter Type: esriGPParameterTypeOptional
Category: Advanced Analysis


Parameter: Save_Route_Data

Data Type: GPBoolean
Display Name Save Route Data
Description: Choose whether the output includes a zip file that contains a file geodatabase holding the inputs and outputs of the analysis in a format that can be used to share route layers with ArcGIS Online or Portal for ArcGIS. In ArcGIS Desktop, the default output location for this output file is in the scratch folder. You can determine the location of the scratch folder by evaluating the value of the arcpy.env.scratchFolder geoprocessing environment.Checked (True): The tool writes out a .zip archive containing a file geodatabase workspace that contains the inputs and outputs of the analysis.Unchecked (False): Route data is not saved. This is the default.
Direction: esriGPParameterDirectionInput
Default Value: false
Parameter Type: esriGPParameterTypeOptional
Category: Output


Parameter: Output_Network_Analysis_Layer

Data Type: GPDataFile
Display Name Output Network Analysis Layer
Description:
Direction: esriGPParameterDirectionOutput
Default Value:
Parameter Type: esriGPParameterTypeDerived
Category:


Parameter: Output_Route_Data

Data Type: GPDataFile
Display Name Output Route Data
Description:
Direction: esriGPParameterDirectionOutput
Default Value:
Parameter Type: esriGPParameterTypeDerived
Category:

Supported Operations:   Submit Job